cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
711
Views
0
Helpful
5
Replies
Beginner

presentation problem on SIP calls in CUCM-VSC

Hi All,

if you would give an advice I will be glad.

when an endpoint that is registered to CUCM-8.6.2.21900-5 makes a conference on MCU MSE 8510, the sharing presentation is shown on the media channel it does not use content channel. However same endpoint is registered to VCS-X.7.2.1 and make SIP call to MCU there is no problem, the media and presentation channels are different.

Endpoint SIP Call-->CUCM-->VCS-->MCU - media and presentation are on same channel.

Endpoint SIP Call-->VCS-->MCU - media and presentation are on different channel.

Thank you.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Participant

presentation problem on SIP calls in CUCM-VSC

Hi Onur,

Take a look at the following document -

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf

Page 46 shows you what you'll need to modify to get the BFCP working between CUCM and VCS

Thanks,

Guy

View solution in original post

5 REPLIES 5
Highlighted
Participant

presentation problem on SIP calls in CUCM-VSC

Hi Onur,

Take a look at the following document -

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_8_9_and_X7-2.pdf

Page 46 shows you what you'll need to modify to get the BFCP working between CUCM and VCS

Thanks,

Guy

View solution in original post

Highlighted
Beginner

presentation problem on SIP calls in CUCM-VSC

thank you Badman,

but in our config the BFCP is enabled.

Highlighted
Participant

presentation problem on SIP calls in CUCM-VSC

ok, can you give us more information on how the advanced zone profile for the link to CUCM is set up on VCS?

Highlighted
Beginner

presentation problem on SIP calls in CUCM-VSC

because of working hours I can not change the profile,

on an appropriate time I will try this

Thank you

Highlighted
Beginner

presentation problem on SIP calls in CUCM-VSC

Badman thank you so much,

it is working.

CreatePlease to create content