cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1833
Views
0
Helpful
4
Replies

Program a shutdown on a SX20

Afternoon!

I've been having a look on my SX20 web management (TC6.3.0.3d8e7d1) about programing a shutdown but I didn't find any menu for it, is it possible?

Best regards.

Everyone's tags (2)
4 REPLIES 4
Cisco Employee

Program a shutdown on a SX20

Hi Eduardo,

you can shutdown  your SX20 through the web interface.

you will get this option under Maintenance>restart>shutdown telepresence device.

VIP Advisor

Program a shutdown on a SX20

In addiition to Amit's response above, you can use the API to do this with the following command:

xcommand Boot Action: Shutdown

You can send this via the command line (ssh/telnet), or though the web interface (Configuration > API).

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Beginner

  Great support.  This is

  Great support.  This is very useful in terms of remote management. anyway, those API commands for a interface is   local to that device, am i right?  how this API can be useful if i use a easier interface for my IT Support to remote management or anything else? does TMS also has API exposed to do this?

VIP Advisor

You should be able to get

You should be able to get your "easier interface" to telnet or ssh in to the device and issue the xcommand.  You can also do it via XML (see http://<IP Address of Codec>/command.xml).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards