cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
659
Views
0
Helpful
0
Replies
Highlighted
Explorer

QoS applied to SUP32-GE-3B, but queueing doesn't change.

The 6509 with SUP-32-GE-3B (8 GE ports) is running IOS 12.2(33)SXH7.  I've applied this QoS config to a couple of the supervicor GE ports that we use for uplinks:

interface GigabitEthernet5/1

description to Po1 ANB-RS6509-DU-C

no ip address

wrr-queue bandwidth 5 50 45

priority-queue queue-limit 30

wrr-queue queue-limit 5 40 25

wrr-queue random-detect min-threshold 1 80 100 100 100 100 100 100 100

wrr-queue random-detect min-threshold 2 80 100 100 100 100 100 100 100

wrr-queue random-detect min-threshold 3 60 70 80 90 100 100 100 100

wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100

wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100

wrr-queue random-detect max-threshold 3 70 80 90 100 100 100 100 100

wrr-queue cos-map 1 1 1

wrr-queue cos-map 2 1 0

wrr-queue cos-map 3 1 2

wrr-queue cos-map 3 2 3

wrr-queue cos-map 3 3 6

wrr-queue cos-map 3 4 7

priority-queue cos-map 1 4 5

mls qos trust dscp

channel-group 1 mode desirable

end

But when I do a 'show queueing int' there isn't any change from the default, as can be seen by the queue tail-drop-thresholds and queue thresh cos-map:

ANB-RS6509-AU-E200#sh queueing int g5/1

Interface GigabitEthernet5/1 queueing strategy:  Weighted Round-Robin

  QoS is disabled globally

  Port is untrusted

  Extend trust state: not trusted [COS = 0]

  Default COS is 0

    Queueing Mode In Tx direction: mode-cos

    Transmit queues [type = 1p3q8t]:

    Queue Id    Scheduling  Num of thresholds

    -----------------------------------------

       01         WRR                 08

       02         WRR                 08

       03         WRR                 08

       04         Priority            01

    WRR bandwidth ratios:  100[queue 1]   0[queue 2]   0[queue 3]

    queue-limit ratios:    100[queue 1]   0[queue 2]   0[queue 3]   0[Pri Queue]

    queue tail-drop-thresholds

    --------------------------

    1     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    2     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    3     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-min-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      3    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-max-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      3    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    WRED disabled queues:      1  2  3

    queue thresh cos-map

    ---------------------------------------

    1     1      0 1 2 3 4 5 6 7

    1     2     

    1     3     

    1     4     

    1     5     

    1     6     

    1     7     

    1     8     

    2     1     

    2     2     

    2     3     

    2     4     

    2     5     

    2     6     

    2     7     

    2     8     

    3     1     

    3     2     

    3     3     

    3     4     

    3     5     

    3     6     

    3     7     

    3     8     

    4     1     

    Queueing Mode In Rx direction: mode-cos

    Receive queues [type = 2q8t]:

    Queue Id    Scheduling  Num of thresholds

    -----------------------------------------

       01         WRR                 08

       02         WRR                 08

    WRR bandwidth ratios:  100[queue 1]   0[queue 2]

    queue-limit ratios:    100[queue 1]   0[queue 2]

    queue tail-drop-thresholds

    --------------------------

    1     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    2     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-min-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-max-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    WRED disabled queues:      1  2

    queue thresh cos-map

    ---------------------------------------

    1     1      0 1 2 3 4 5 6 7

    1     2     

    1     3     

    1     4     

    1     5     

    1     6     

    1     7     

    1     8     

    2     1     

    2     2     

    2     3     

    2     4     

    2     5     

    2     6     

    2     7     

    2     8     

  Packets dropped on Transmit:

    BPDU packets:  0

    queue              dropped  [cos-map]

    ---------------------------------------------

    1                        0  [0 1 2 3 4 5 6 7 ]

    2                        0  []

    3                        0  []

    4                        0  []

  Packets dropped on Receive:

    BPDU packets:  0

    queue              dropped  [cos-map]

    ---------------------------------------------

    1                        0  [0 1 2 3 4 5 6 7 ]

    2                        0  []

Any idea why?

0 REPLIES 0