cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
304
Views
0
Helpful
2
Replies
mesut ozcan
Beginner

QoS on Cisco Routers for Avaya IPT Enviroment

Dear all,

I need to configure QoS on Cisco routers for support Avaya IP phones voice quality.

IP network of phones are known and 10% of BW will be reserve.

Any suggestion will be greatful.

If possible you can also share config samples.

Best Regards,

Mesut

2 REPLIES 2
Mark Malone
VIP Mentor

The 10% would be the layer 3 qos on the wan interface in a service policy with class map matched with an access-list of your voice network/subnet

good examples to follow on this guide just change the bandwidth statements

https://glazenbakje.wordpress.com/2010/12/21/cisco-qos-configuration-simple-example/

regarding layer 2 qos on your switches it depends on what they support mls or autoqos

if mls you just need mls qos trust dscp on your access and layer 2 uplinks or auto qos trust voip

Dennis Mink
Advisor

mark RTP and SIP traffic to amount to 10% of your link, and mark this as ef or af41 then police based on those DSCP markers, voila!

Please remember to rate useful posts, by clicking on the stars below.

Content for Community-Ad

Spotlight Awards 2021