cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

319
Views
0
Helpful
3
Replies
Beginner

QuadCam Motion Tracking

We recently had a WebEX Room Kit Pro with a QuadCam installed. Our setup uses a stage rather than a conference table. Currently when the QuadCam tracking is turned on it operates with a closeup snap to the speaker after they have moved positions. 

 

Is there a way to get the camera to simply follow the speaker actively instead of snapping the shot?

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
VIP Advisor

Re: QuadCam Motion Tracking


@James Evans wrote:

Is there a way to get the camera to simply follow the speaker actively instead of snapping the shot?


No, the speaker tracking will "snap" between the positions where the person is speaking as the camera is actually doing a digital crop of the physical camera image to present, and not actually moving with the presenter.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
VIP Advisor

Re: QuadCam Motion Tracking

What you are probably after would be running the endpoint in Presenter Track mode with an additional Precision 60 camera as the Presenter camera.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
3 REPLIES 3
Highlighted
VIP Advisor

Re: QuadCam Motion Tracking


@James Evans wrote:

Is there a way to get the camera to simply follow the speaker actively instead of snapping the shot?


No, the speaker tracking will "snap" between the positions where the person is speaking as the camera is actually doing a digital crop of the physical camera image to present, and not actually moving with the presenter.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Beginner

Re: QuadCam Motion Tracking

I was afraid of that. I think the installer may have elected to provide us with the wrong model camera. Iv'e seen demo's videos in the past where the camera will follow track (digitally or optically i don't know)

 

Can someone tell me what the correct camera model would allow for follow tracking?

 

thanks

VIP Advisor

Re: QuadCam Motion Tracking

What you are probably after would be running the endpoint in Presenter Track mode with an additional Precision 60 camera as the Presenter camera.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards