cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1976
Views
5
Helpful
1
Replies

"Inbound TLS Negotiation Error"

Paul Olson
Level 1
Level 1

I'm seeing this message on our VCS-C (v.7.2.3) concerning a Polycom HDX 8000 codec. The source port changes, but the DEST port remains 5061. A reboot of the codec appears to make the log message disappear. 

2014-08-01T09:25:06-07:00 tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Internal IP address" Src-port="39573" Dst-ip="140.107.135.174" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2014-08-01 16:25:06,734"
2014-08-01T09:25:06-07:00 tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="internal IP address" Src-port="39571" Dst-ip="140.107.135.174" Dst-port="5061" Detail="unknown protocol" Protocol="TLS" Level="1" UTCTime="2014-08-01 16:25:06,694"

Has anyone seen this or have an explanation?

Paul

1 Reply 1

Paul Olson
Level 1
Level 1

Per the Cisco Deployment Guide the HDX is to register via TCP and not TLS.

http://supportdocs.polycom.com/PolycomService/support/global/documents/support/strategic_partner_solutions/Cisco_Solution_Deployment_Guide_us.pdf

 

Setting the Transport Protocol to TCP rather than Auto has stopped this message.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: