cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9179
Views
0
Helpful
15
Replies

"No Incoming Video " message in Video Conferencing.

Ninad Thakare
Level 1
Level 1

Please help me out
I  have two locations, A and B which want to initiate a call to a test  site with public IP's. Site A is OK while calling from B site, i Get an  error " No incoming Video".

Steps which I follow are :
1. Call an Public IP.
2. Call gets connected.
3. Audio is fine
4. On screen there is a message " No Incoming Video"

I have kept following ports open on my Router, and their is not Firewall in between.
TCP : 1720, 5060 and 49152 to 65535
UDP : 2326 to 2500, 5555 to 5574 & 11000 to 20999
where as all IP,TCP & UDP is allowed to the Video Conferencing IP.

Note : 1. Video Conference call from Site A to B is working fine.

          2. If I try the same from the secondary ISP link skipping the router, the call gets connected successfully.

          3. Same ports are allowed on A site's router and its working fine.

Thanks in Advance.

Regards,

Ninad Thakare

15 Replies 15

Ninad Thakare
Level 1
Level 1

Thanks all of you...

My problem got solved. I changed NAT mode and IP address and i got it...

Thanks all of your support.

Regards,

Ninad Thakare

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: