Registering CTS EX60 on CUCM 8.0.0.99141-4

[Edson Vuma]

Hi

I have a CTS EX60, and CUCM 8.0.0.99141-4 installed.

How I can register this device on CUCM?

Any help on this?

--
Regards
Edson Vuma       

[Paulo Souza]

Hi,

When registering EX60 to CUCM, it is highly recommended to use CUCM version 8.6.2 and later. However, you can still add your EX60 to CUCM 5.1 and newer (including 8.0) as a third party SIP device, but it will work with some limitations.

To learn how to add EX60 to CUCM as a SIP third party device, follow this document:

https://supportforums.cisco.com/docs/DOC-26382

To learn how to add EX60 to CUCM 8.6.2 and later (recommended), follow the documents "Administering TC Endpoints on CUCM":

http://www.cisco.com/en/US/partner/products/ps11327/prod_maintenance_guides_list.html

Regards

Paulo Souza

Please rate replies and mark question as "answered" if applicable.