08-26-2016 06:30 AM - edited 03-18-2019 06:19 AM
Hi Guys,
I am fairly new to cisco telepresence and trying to build a BoM for a customer. I have identified and chosen to use Cisco TelePresence MX300 55 Gen 2 (CTS-MX300-K9).
I need to confirm the following
1. Do I need a CUCM at the back-end?
2. Do I need a gateway between the CUCM and the internet to be able to hold conference with external users and partners
I would really appreciate all the help I can get so I dont miss out any requirement/component
Regards,
Richard
Solved! Go to Solution.
08-26-2016 03:03 PM
You can deploy it using either CUCM, VCS, or even standalone, although standalone isn't an officially supported deployment.
If you use CUCM, an Expressway-C/E allows for B2B calling with external endpoints.
08-26-2016 03:03 PM
You can deploy it using either CUCM, VCS, or even standalone, although standalone isn't an officially supported deployment.
If you use CUCM, an Expressway-C/E allows for B2B calling with external endpoints.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: