cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
10075
Views
50
Helpful
20
Replies

Room Kit direct call without registration

Hi!

 

Can Room Kit/Plus make direct calls withour registration?

As I understand it works with CE9. So it means that it can make direct call via SIP/H.323  without any registration.

Am i right?

Be ready
Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Contributor

Re: Room Kit direct call without registration

Yes, that is correct. Both RKs can function independent of any video infrastructure; or they can be registered to CUCM, VCS or Spark Cloud.
Thank you,
Justin Ferello
Technical Support Specialist, ScanSource KBZ

View solution in original post

20 REPLIES 20
Highlighted
Contributor

Re: Room Kit direct call without registration

Yes, that is correct. Both RKs can function independent of any video infrastructure; or they can be registered to CUCM, VCS or Spark Cloud.
Thank you,
Justin Ferello
Technical Support Specialist, ScanSource KBZ

View solution in original post

Highlighted

Re: Room Kit direct call without registration

Thank you!

Be ready
Highlighted
Beginner

Re: Room Kit direct call without registration

Dear Sir If Possible to direct Call Connect CIsco webex roomkit to sx20??


@Valeriy Tarazanov wrote:

Thank you!


 

Highlighted

Re: Room Kit direct call without registration

Hi Justin,

Do you know if a Cisco  Spark Room Kit can call through direct IP dialling to a 3rd party VC endpoint?

Thanks

Highlighted

Re: Room Kit direct call without registration

Forgot to mention that the CSR Kit is registered in the Spark cloud.

Highlighted
VIP Advisor

Re: Room Kit direct call without registration

If your SRK is registered to the Spark Cloud, then you can dial a SIP URI.  If you've only been given an IP address, try sticking something and an @ in front of the IP, ie endpoint@ipaddress.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Highlighted

Re: Room Kit direct call without registration

Thanks.

Tried that, with no success. Any other ideas?

Highlighted
VIP Advisor

Re: Room Kit direct call without registration

If that's the case, then the other system is likely a H.323 device, not SIP, so you'll need to have something in between them that can interwork the protocols.

 

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Highlighted

Re: Room Kit direct call without registration

That is correct. But in the documentation you specify that csr kit supports
h323. No mention to the need of anything in between.
Highlighted
VIP Advisor

Re: Room Kit direct call without registration

The SRK endpoint does support H.323 if used as a Standalone unit (as per the original poster's query), or if registered to a Call Control Platform that supports H.323 (ie Cisco VCS), or, with something that can interwork between SIP and H.323 if it is registered to a SIP only Call Control Platform (CUCM / Spark Cloud / etc).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Highlighted

Re: Room Kit direct call without registration

Can I convert it to stand alone? Do I need aditional licensing?

Highlighted

Re: Room Kit direct call without registration

Endpoints registered to Spark purchased under MSRP pricing can't be converted to standalone endpoints, they only support bring registered to Spark. Endpoints purchased under GPL pricing can be registered to on-premise call control and/or operate standalone.
Highlighted

Re: Room Kit direct call without registration

Thanks for the info, Patrick.

Highlighted
Contributor

Re: Room Kit direct call without registration

Interesting, how do they prevent this via the software? Could you just use TFTP to load the regular PKG on the unit?
Thank you,
Justin Ferello
Technical Support Specialist, ScanSource KBZ
CreatePlease to create content