Since Cisco CE Software Upgrade, unable to navigate a Cisco MSE MCU using up / down / left to select a conference in the list
We recently upgraded several SX Series CODECs from the TC version of software to the CE version of software and now have some issues attempting to connect to far-end video bridge (specifically Cisco MSE MCUs).
I only state more specifically the Cisco MSE MCUs is that is who we communicate with the most and the hosts utilize the MSE Series.
When we had TC installed on the endpoint and dialed out to the host MCU and received the 'Welcome Message' and prompt to enter the access code.
Well there are times when we are not provided the access code and we could scroll through the listing using the up / down arrows and then use the left arrow to select the conference -- this does not seem to be the case any longer with the CE series software.
I have attempted all the buttons on the remote, but so far no luck.
We have both the TRC 5 and TRC 6 remote controls (TRC 6 being the ones designed for CE Series Software).
And yes, the TRC 5 remotes work with CE, but if you press an incorrect button you will be notified the option is not supported. However, we are unable to find a way to connect using the up / down / left using the TRC 6 remote that is supplied with CE units.
We do NOT use CUCM in our environment.
I am wondering if anyone is aware of a setting I need to change within the software to allow this functionality again.
1) Navigate to Participants in the upper right corner and press OK on the remote control.
2) A menu showing a list of the participants in the call will now appear. Navigate to the participant, whose camera you want to control and press OK on the remote control. A submenu will now appear.
3) To control the far end camera / select a conference from an MCU list - navigate to Camera (number two from the right) and click OK on the remote control.
*** Ensure "FarEndControl SignalCapability" has to be set to 'On' within the web interface menu otherwise you will not have the ability to control far-end cameras. If the option is not enabled then the ability to control the far-end camera or select a conference from an MCU list is not possible.
Local Zone: This is a collection of all devices that are registered with Cisco Expressway. The local zone is divided to subzones. These subzones include the automatically crated default subzone and up to 1000 manually configured subzones. In additio...
Datacenter virtualization is the process of employing virtual hardware for designing, developing, and implementing the datacenters. It is often used as an umbrella term that entails different categories like application virtualization, server virtua...
Hiện nay trên thế giới có rất nhiều hãng sản xuất máy lọc nước ion kiềm đến từ Hàn Quốc, Nhật Bản, Đài Loan, Hoa Kỳ. Các thương hiệu với nhiều chủng loại với nhiều tính năng cũng như giá cả khác nhau không khỏi khiến người tiêu dùng đắn đo lựa chọn.Bài vi...
When talking about Dial Plan and Digit Manipulation Cisco Unified Communication Manager, three components play an important roles to perform the transformation of the calling and called parties.The Translation Pattern, Transformation Pattern and Rou...
ICE, STUN, and TURN are used to establish a MEDIA connection between two devices on different networks separated by firewalls and NAT servers. They do not apply to signaling between devices which means that if you cannot establish a signaling connec...