cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
490
Views
0
Helpful
2
Replies
Highlighted
Beginner
Beginner

SIP Provider Intergration

Hi Guys

I would like to intergrate cisco router to a sip provider for cut down on costs. How can I get the router to register to sip Provider and with various parameters such as username, password etc... and which is the Best entrance level router that supports this intergration.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

You must configure special commands under sip-ua section of you router. This is an example:

sip-ua

credentials username 1234 password 7 1234 realm youritsp_domain_or_sip_server

uthentication username 1234 password 71234 realm youritsp_domain_or_sip_server

registrar dns:youritsp_domain_or_sip_server expires 300

sip-server dns:youritsp_domain_or_sip_server

You can find details about these command on the Cisco IOS Voice command reference guides.

A good "entry level" router is the 2900 series.

Regards.

View solution in original post

2 REPLIES 2
Highlighted
Rising star

You must configure special commands under sip-ua section of you router. This is an example:

sip-ua

credentials username 1234 password 7 1234 realm youritsp_domain_or_sip_server

uthentication username 1234 password 71234 realm youritsp_domain_or_sip_server

registrar dns:youritsp_domain_or_sip_server expires 300

sip-server dns:youritsp_domain_or_sip_server

You can find details about these command on the Cisco IOS Voice command reference guides.

A good "entry level" router is the 2900 series.

Regards.

View solution in original post

Highlighted
Hall of Fame Master

Same answer as in another thread, if you are the end user, you will need to work with someone of experience.

Content for Community-Ad