SNMP MIB Reference

[t.svatek]

Hi

I would need the SNMP MIB Reference for C-Codecs, SX20 etc.

Thanks

Tino

[Paulo Souza · Accepted solution]

C-Series uses XML Feedback to provide status and only supports these OID's described in RFC1213

1.3.6.1.2.1.1.1

1.3.6.1.2.1.1.2

1.3.6.1.2.1.1.3

1.3.6.1.2.1.1.4

1.3.6.1.2.1.1.5

1.3.6.1.2.1.1.6

1.3.6.1.2.1.1.7

(sysDescr, sysObjectID, sysUpTime, sysContact, sysName, sysLocation, sysServices)

-----------------------------------------------------------------------

Look at this topic:

https://supportforums.cisco.com/thread/2165290

Paulo Souza

[t.svatek]

thank you very much!

[Paulo Souza]

You are welcome!

Paulo Souza