Switch firmware on CTS-1300

[Syed]

Dear All,

May I ask you how to switch firmware version on CTS-1300 through cli?

Thank you

Regards,

Syed

[Syed]

I want to switch from slot1 to slot2

Please see below show version output

admin:show version
primary
Factory CTS 1.9.2(19) P1
*Slot 1 CTS 1.9.2(19) P1
Slot 2 CTS 1.10.7(5) P1
loads file information
Factory (cmterm-CTS.1-9-2-19R-K9.P1)
CTS: CTS.1-9-2-19R-K9.P1.sbn
Touch: CTSDEV.1-9-2-19R-K9.P1.SPA
Slot 1 (cmterm-CTS.1-9-2-19R-K9.P1)
CTS: CTS.1-9-2-19R-K9.P1.sbn
Touch: CTSDEV.1-9-2-19R-K9.P1.SPA
Slot 2
No loads file

[navidsyed · Accepted solution]

Try utils system switch-version

Refer following URL for more information,  http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/command_ref/tx_sw_cli_book/tx_sw_cli_cmd_utils.html#26829

[Syed]

Thank you Navid & Prasad.

Learnt a new thing.

[Prasad Paradkar · Accepted solution]

Hi syed,

you can login to the CLI of the CTS and give command ütils system switch-version.

You can also be specific and do slot switching by giving command utils system switch-version force 2

. If you do not configure an optional value, the system will toggle between slots 1 and 2. If the system is currently in a call, the version change will not be allowed. To override, use the force option to switch immediately.

It is not recommended to switch the version during the live call.