cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

1574
Views
0
Helpful
6
Replies
Beginner

Sx 20 integration with Huawei

hi All

I like to register sx20 with software version TC 5 on Huawei Softx 3000.   From  Huwei to sx20 call successfully establish but sx20 to Huwei to sx20 call not connect.

Regards

Yasir Vistro        

Yasir Vistro
Everyone's tags (4)
6 REPLIES 6
Highlighted
Beginner

Sx 20 integration with Huawei

if You can call me on number 0092 343 2517610.i will help you on same.

regards

Saad

Beginner

Re: Sx 20 integration with Huawei

Saad

i try to call you but your number is not responding ..

Yasir Vistro

Yasir Vistro
Cisco Employee

Sx 20 integration with Huawei

Do you have call log from SX20 to Huwei which help us to understand where call negotiation failing.

BTW, if you disable encryption on SX20 (xConfiguration Conference 1 Encryption Mode:off), do you see same result as well on call initiating from SX20?

Beginner

Sx 20 integration with Huawei

2488.02 IXUser I: iXController(0x43026948) registerProtocolUser: proto=1, user=0

x430271d8

2488.02 IXUser I: iXController(0x43026948) registerProtocolUser: proto=2, user=0

x43001588

2488.02 MC I: Experimental 1080p60 is configured on this box

2488.04 MC I: Conference::addRemoteParticipant(p=43,ch=3) adding modecontrol sha

red channel

2488.04 MC I: Conference::modeChanged(c=34) holder=-1  Video (3): vid-off 0x0@0.

0  0k

2488.04 MC I: RemoteParticipant::outgoingDuoModeChanged(p=43, ch=3): ModesContro

ller wants to run mode: Video (3): vid-off 0x0@0.0  0k

2488.05 CAMERA I: CamVisca::Ready_doCAMActionReq cameraId=1 actionId=1

2488.05 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialize

d 1

2488.05 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 1 w 1920 h

1080

2488.05 RTP I: SockPair::dynamic(sock=0) retrying next pair (rtp port=2408)

2488.06 RTP I: SockPair::dynamic(sock=1) retrying next pair (rtp port=2410)

2488.06 RTP I: SockPair::dynamic(sock=2) retrying next pair (rtp port=2412)

2488.06 RTP I: SockPair::dynamic(sock=3) retrying next pair (rtp port=2414)

2488.06 RTP I: SockPair::dynamic(sock=4) retrying next pair (rtp port=2416)

2488.06 CAMERA I: CamVisca::Ready_doCAMActionReq cameraId=1 actionId=19

2488.06 DATACTRL I: DataGateAddReq(ig=42) assoc gate -1 hdlc=yes

2488.14 VIDEOROUTER-0 W: VideoRouter_Ready_doVIDDelayInd: No gateid 4 from FSPRO

XY_FSM 9

2488.15 MC I: MediaServerAction(): InputGate(ig=601) creation took 108 milisecon

ds

2488.16 MC I: MediaServerAction(): InputGate(ig=609) creation took 114 milisecon

ds

2488.17 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=381/60/0/4577

2488.25 RTP I: TrafficCtrl: Added new entry (main): id: 404, tcid: 65568

2488.27 MC I: MediaServerAction(): InputGate(ig=604) creation took 226 milisecon

ds

2488.28 RTP I: TrafficCtrl: Added new entry (duo): id: 406, tcid: 65568

2488.32 MC I: MediaServerAction(): InputGate(ig=607) creation took 276 milisecon

ds

2488.34 RTP I: TrafficCtrl: Added new entry (duo): id: 410, tcid: 65569

2488.39 MC I: CallParticipantImpl: calledUri: sip:65787@10.252.141.65

2488.39 SipCall I: ==== makeOutgoingCall appId=43, stackId=na

2488.40 MC I: Experimental 1080p60 is configured on this box

2488.43 MC I: RemoteParticipant::proposeMode(p=43, ch=1): Did not find mixer ((n

il)) or channel (0x430019e4)

2488.43 MC I: RemoteParticipant::propose60fpsThreshold(p=43, ch=1): Did not find

mixer ((nil)) or channel (0x430019e4)

2488.43 MC I: RemoteParticipant::reevalRefMode(p=43,ch=1) set ref [Audio (1): G.

711a  64k ] q= auto, t60=6000

2488.43 MC I: RemoteParticipant::reevalRefMode(p=43,ch=2) set ref [Video (2): vi

d-off 0x0@0.0  0k ] q= auto, t60=6000

2488.43 MC I: RemoteParticipant::reevalRefMode(p=43,ch=3) set ref [Video (3): vi

d-off 0x0@0.0  0k ] q= auto, t60=6000

2488.43 MC I: RemoteParticipant::proposeMode(p=43, ch=4): Did not find mixer ((n

il)) or channel (0x430271bc)

2488.43 MC I: RemoteParticipant::propose60fpsThreshold(p=43, ch=4): Did not find

mixer ((nil)) or channel (0x430271bc)

2488.43 MC I: RemoteParticipant::reevalRefMode(p=43,ch=4) set ref [Data (4): H.2

24-HDLC  64k ] q= auto, t60=6000

2488.43 MC I: RemoteParticipant::reevalRefMode(p=43,ch=5) set ref [Video (5): vi

d-off 0x0@0.0  0k ] q= auto, t60=6000

2488.43 MC I: MediaServerAction(): InputGate(ig=611) creation took 383 milisecon

ds

2488.43 SipCall I: sip_call_handler::handleSIPMRtpLocalCapsetInd(43/-1/-1, capse

tentries: 23): Received local capset with payload types set

2488.43 MC I: RemoteParticipant::configureIncomingChannel: Capability table:

1: (2) H.264 maxbr=6000000 maxfs=9000 maxmbps=490000 maxsmbps=490000 maxfps=600

0  [97]

2: (2) H.264NIL maxbr=6000000 maxfs=9000 maxmbps=490000 maxsmbps=490000 maxfps=

6000  [98]

3: (2) H.263PP maxbr=3000000 fps-qcif=3000 fps-cif=3000 fps-4cif=3000 fps-sif=3

000 fps-4sif=3000 fps-vga=3000 fps-svga=3000 fps-xga=3000 fps-wcif=3000 fps-w4ci

f=3000 fps-w720=3000 fps-wxga=3000  [99]

4: (2) H.263 maxbr=2000000 fps-qcif=3000 fps-cif=3000 fps-4cif=1500  [34]

5: (3) H.264 maxbr=2000000 maxfs=8160 maxmbps=122500 maxsmbps=122500 maxfps=300

0 feat=Pres-Token  [97]

6: (3) H.264NIL maxbr=2000000 maxfs=8160 maxmbps=122500 maxsmbps=122500 maxfps=

3000 feat=Pres-Token  [98]

7: (3) H.263PP maxbr=2000000 fps-qcif=3000 fps-cif=3000 fps-4cif=3000 fps-sif=3

000 fps-4sif=3000 fps-vga=3000 fps-svga=3000 fps-xga=3000 fps-wcif=3000 fps-w4ci

f=3000 fps-w720=3000 fps-wxga=3000 feat=Pres-Token  [99]

8: (3) H.263 maxbr=2000000 fps-qcif=3000 fps-cif=3000 fps-4cif=1500 feat=Pres-T

oken  [34]

9: (1) AAC-LD rate=128k profile=25  [100]

10: (1) AAC-LD rate=64k profile=24  [102]

11: (1) G.722.1 rate=32k ptime(ms)=40  [103]

12: (1) G.722.1 rate=24k ptime(ms)=40  [104]

13: (1) G.722 rate=64k ptime(ms)=40  [9]

14: (1) G.711a rate=64k ptime(ms)=40  [8]

15: (1) G.711mu rate=64k ptime(ms)=40  [0]

16: (1) RTP-Dtmf  [101]

17: (2) RTCP-Feedback-PLI

17: (2) RTCP-Feedback-FIR

17: (3) RTCP-Feedback-PLI

17: (3) RTCP-Feedback-FIR

18: (3) H.239Ctrl

19: (4) H.224-HDLC  [105]

19: (4) H.224  [105]

Simcapset:

(1) {9,10,11,12,13,14,15,16}{1,2,3,4}{5,6,7,8}{19,19}

2488.44 DATACTRL I: DataGateCfgReq(ig=42) hdlc=yes

2488.46 SipStack I: NETConnectRej: failure as OS level

2488.47 SipStack I: NETConnectRej: failure as OS level

2488.47 MC I: VideoInputGateImpl::inputGateConfigState(ig=604): DecoderConfig[60

4]: maxMbps: -1 maxWidth: 1920 maxHeight: 1200 memsize: 1

2488.70 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=381/60/0/4578

2488.97 SipStack I: NETConnectRej: failure as OS level

2488.97 SipStack I: NETConnectRej: failure as OS level

2489.11 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=601,p=43) [Audio (1)

: aud-off stereo  0k ]

2489.22 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=381/60/0/4580

2489.74 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=381/60/0/4579

2489.97 SipStack I: NETConnectRej: failure as OS level

2489.97 SipStack I: NETConnectRej: failure as OS level

2491.97 SipStack I: NETConnectRej: failure as OS level

2491.97 SipStack I: NETConnectRej: failure as OS level

2495.97 SipStack I: NETConnectRej: failure as OS level

2495.97 SipStack I: NETConnectRej: failure as OS level

2503.96 SipStack I: NETConnectRej: failure as OS level

2503.97 SipStack I: NETConnectRej: failure as OS level

2507.07 SipCall I: ==== outgoingDisconnect appId=43, stackId=-1, eventCookie=-1,

(sipCause.dc=8, sipCause.status=0)

2507.07 SipStack !ER SIP_ASSERT, File: functional/protocols/sip/sipuafsm.c, Line

1957

2507.07 SipCall I: sip_call_handler::handleSIPMDiscCnf(43/-1/-1): Disconnect con

firm

2507.08 SipStack I: NETConnectRej: failure as OS level

2507.08 SipStack I: NETConnectRej: failure as OS level

2515.06 MC W: TransactionActionStorage::cbTimeoutAction: Disconnect callstackid(

43)

2515.10 IXUser I: iXController teardownIxChannel: Not connected

2515.10 MC I: CapabilityControllerImpl::setCapset() reduced = 0, waitForDuoGate

= 0, hasLegacyVideo = 0

2515.12 RTP I: TrafficCtrl: Deleting entry (main): id: 404, tcid: 65568

2515.12 RTP I: TrafficCtrl: Deleting entry (duo): id: 406, tcid: 65568

2515.12 RTP I: TrafficCtrl: Deleting entry (duo): id: 410, tcid: 65569

2515.12 CAMERA I: CamVisca::Ready_doCAMActionReq cameraId=1 actionId=20

2515.12 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialize

d 1

2515.13 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 1 w 1920 h

1080

2515.13 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialize

d 1

2515.13 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 1 w 1920 h

1080

2515.13 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialize

d 1

2515.13 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 0 w 1280 h

720

2515.13 DATACTRL I: DataGateRemReq(ig=42)

2515.29 MC I: MediaServerAction(): InputGate(ig=614) creation took 187 milisecon

ds

2515.31 VIDEOCTRL-0 I: VIDEOCTRL_doReadyMixerConfigureReq: redundant signal for

mixer (rawvideo,1) from (MSCtrl,0)

2515.31 VIDEOCTRL-0 I: VIDEOCTRL_doReadyMixerConfigureReq: redundant signal for

mixer (rawvideo,2) from (MSCtrl,0)

2520.44 MC W: Mcfsm::handleOtherMessages() unknown msg SIP_DialogFreed_Ind from

SipStack

Regards

Yasir Vistro

Yasir Vistro
Cisco Employee

Sx 20 integration with Huawei

The call log from SX20 doesn’t contain any error or useful log identify the call connection problem.

However possible issue relate with CapSet size. Huawei Endpoint may not handle large CapSet from SX20 (Endpoint team has seen this before).

Try using CapSet filter command on SX20 to reduce CapSet offering to Huawei Endpoint and see whether this may help resolving your call connection issue.

Cisco Employee

Sx 20 integration with Huawei

Hi All

Is SX20 supported through Huawei VP9620 MCU?

Pls help

thx

Manas

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards