I am trying to enable different configuration changes through the xConfiguration command however when I am enabling it from the web interface when I am logged in as "admin" .
When I am trying to execute the command it is saying " User not Authorised". I have been able to log inot the SX 20 with the root account for the OS however I am not sure how to change the user permissions from the linux configuration.
There are really only two account, "root" which gives access at the unix level, and "admin" which gives access at the TCShell level (for the xcommands). There's not anything that can be changed to give or remove any further permission.
What are the commands you are trying to send that give the "not authorised" messages?
Wayne -- Please remember to rate responses and to mark your question as answered if appropriate.
It might be handy to know what exactly you are trying to do.
There are some api commands which you can not use, or which are only there to read out the config.
like the web snapshots, you can enable it via the menu / touchpanel but not via ssh or the webinterface.
xConfiguration Video AllowWebSnapshots: On
AllowWebSnapshots: User not authorized
From the sx20 admin guide which I would recomend you to check as well:
xConfiguration Video AllowWebSnapshots
Allow or disallow snapshots being taken of the local input sources, remote sites and presentation chan- nel. If allowed, the web interface Call Control page will show snapshots both when idle and in a call.
NOTE: This feature is disabled by default, and must be enabled from the On Screen Display (OSD), from a directly connected Touch controller, or via the codec's serial port (USB port and RS-232 adapter).
Requires user role: ADMIN Value space:
Off: Capturing web snapshots is not allowed. On: Web snapshots can be captured and displayed on the web interface.
example: xConfiguration Video AllowWebSnapshots: Off
Greetings, Wanted to share a few lessons learned while migrating from a distributed to centralized IMP deployment. Our current setup included many CUCM/IMP distributed clusters with centralized Expressway server for MRA login. We did not wish to perf...
Parsec's Cisco UCCE/PCCE CC Connector application for CRM works as a bridge between the CRM and Cisco UCCE/PCCE CC solution.The CRM can be any cloud based CRM like Salesforce (SFDC), ServiceNow ,MS Dynamics or a 3rd party CRM.The CRM user/Agent will have ...
It’s a feature which allows CUCM to determine whether the phone is in its home location or a roaming station.By enabling this feature users can roam from one site to another site and acquire the site-specific settings such as Codecs, MRGL, Call rout...
Cisco just Announced their new Collaboration Toolbox resources portal. You can check it out here https://collabtoolbox.cisco.com/ It has a bunch of tools a partner can find helpful. But if your interested in learning which...