cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
15939
Views
45
Helpful
32
Replies

SX10 call type scenario

Hi all,

does anyone know if the SX10 need a sip registar (CUCM or VCS) to do any call? 

for example I my customer need only 2 SX10,  does he need a also a cucm or vcs for do  a call between them? 

otherwise, can I do a call between them only with ip address without any sip registar?   like 2 sx20 ..
thanks in advance,
Carlo

32 REPLIES 32
davidhouska
Beginner

Hi Carlo,

I just tested SX10 yesterday without CUCM or VCS registration and point-to-point calls inside LAN are working fine...

So you just dial IP addresses same way as you dial it from not registered C-series or MXP series codec.

I did not tested calls through firewall to public IPs but I guess the behaviour will be same as SX20 etc.

Regards,
David

soohyung choi
Beginner

Hl,

This problem is resolved using IP Direct call

Thanks for your help

lmediavilla
Beginner

I've tested it many times (SX10) without registrar and you can use it to call outside.

No problem at all.

Create
Recognize Your Peers
Content for Community-Ad