cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
5121
Views
10
Helpful
7
Replies
Highlighted

SX20 CUCM registration rejected

Hello guys.

I have an issue with integration SX20 TC 7.1 with CUCM 9.0

CUCM registration rejected.

Provisioning CUCM checked.

There is error in application_log of SX20:

Sep 17 21:35:30.411 a8 appl[1583]: 7219.85 PROV I: [requestItem] Requesting http://XXX.XXX.XXX.XX:6970/CTLSEPe4c722676b41.tlv, state=ProvItemCTL (CTL requested)
Sep 17 21:35:30.433 a8 appl[1583]: 7219.87 PROV I: [requestItem] Requesting http://XXX.XXX.XXX.XXX:6970/ITLSEPe4c722676b41.tlv, state=ProvItemITL (ITL requested)
Sep 17 21:35:30.444 a8 appl[1583]: 7219.88 PROV I: [requestItem] Requesting http://XXX.XXX.XXX.XXX:6970/SEPe4c722676b41.cnf.xml.sgn, state=ProvItemConfig (config requested (either full or mini))
Sep 17 21:35:30.452 a8 appl[1583]: 7219.89 PROV ERROR: [handleFailedProvRequest] http req URL=http://XXX.XXX.XXX.XXX:6970/SEPe4c722676b41.cnf.xml.sgn req status=failed: HTTP code=404

 

On the SX20 I can see a message from troubleshooting tab:

ERROR: Provisioning Status

Provisioning failed: Provisioning is in an error state.

 

What can be a reason, any ideas?

 

 

7 REPLIES 7
Highlighted
Beginner

Hello,

 

Have you found the solution? I have this problem too

Highlighted

Hello,

For correct sip registration SX20 you need CUCM TelePresence Room license.

In this case i made h225 gatekeeper controlled trunk. 

http://www.videocentric.co.uk/wp-content/uploads/2014/01/IntegrationGuideforSCOPIAECSGatekeeperandCiscoCallManagerVersion7x.pdf

   

 

Highlighted

Hello, thank you, have read.

Highlighted

Thanks for your help, guys

 

Suprisingly, but i found solution in factory reset and next reconfiguration of SX20

Highlighted

I've run into this before.

Deleting the factory installed certs seems to resolve it.

Configuration->Security->CUCM.

Delete the ITL and CTL certs.

Highlighted

This worked for me, tnx.