05-06-2018 10:09 AM - edited 03-18-2019 02:05 PM
Hi,
Our Sx20 connected to CUCM over WAN is getting unregistered intermittently, when we reset the Sx20 it gets registered back, can anybody please share the firewall ports need to be open between the Sx20 and CUCM, thanks.
05-06-2018 06:52 PM - edited 05-06-2018 06:58 PM
When you say it is registered over the WAN, is it part of your network, or coming in via MRA?
I'd suggest talking a look at the IP Port Usage Configuration Guide as these guides detail all the ports quite well.
Please remember to mark helpful responses and to set your question as answered if appropriate.
05-06-2018 07:42 PM
05-06-2018 10:51 PM
There is a list of ports available in the CUCM guides. An example (from CUCM 10) is here: TCP Port Usage Guide
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide