01-24-2014 07:29 AM - edited 03-18-2019 02:29 AM
Hi,
We have a customer with a freshly delivered SX20 and the 2.5x camera.
As far as the documentation says, the 2.5x cam has two built-in microphones, send the audio input over the HDMI into the codec.
per default the Audio input over HDMI is switched on, which is here the case too.
but there is no audio coming from this SX20.
Unfortunately there is no VU meter for that HDMI input for troubleshooting ....
Does anyone have an idea how to proceed?
/hans
01-27-2014 08:46 PM
Hi,
The built in mirophone in the camera is currently disabled. It will not work. You have to use the Cisco Table microphone 20.
Regards,
Tang
=====
01-28-2014 11:17 AM
Tang,
Thanks for that update, it explains why it's not working.
- But, are you able to provide any reason, why it is disabled?
We just had planed that camera for a specific scenario at a customer, and i bed i will have to answer that question....
/hans
01-28-2014 05:26 PM
Hi,
I can only say is probably due to some technical issue. For more details and future plans, you may like to consult your Cisco sales engineer.
regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide