cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
495
Views
0
Helpful
2
Replies
Highlighted

T3 change ssh and vnc password

Hi all,

Any one know how i can change ssh and vnc password on TCU 4.2.1 ?

Best regards

Artemisio

2 REPLIES 2
Highlighted
Cisco Employee

Hi Artemisio.


This is described in the T3 admistrator guide.

http://www.cisco.com/en/US/docs/telepresence/endpoint/t3/guides/t1_t3_admin_guide_tcu421.pdf

at page 9 you can see

Changing Default TCU Password

You will need to be physically connected to change the password. Attach a USB

keyboard to the TCU (or use the VNC server—available from TCU2.0) and press

Ctrl-Shft-Esc to bring up the Windows Task Manager. Select “File” – “New Task

(Run…)” key in “cmd” and press return to bring up the Command Line Interface.

1. Set the new password with “net user Administrator ”.

2. Run the command “control userpasswords2” and you will get a new window

up.

3. Check the box “users must enter a user name and password to use this

computer” and click Apply.

4. Same as above, but uncheck the box and click OK. You will be prompted with

a new password box, use your new password here.

5. Reboot.

//Marius

Highlighted

Hi Marius,

I followed this procedure, but is used only to change the password for access to the TCU. I'm looking for the procedure to change the password VNC and SSH.

Thanks for the reply.

greetings

Artemisio

Content for Community-Ad