|CTI-TMS-SW-K9||Cisco TelePresence Management Suite Includes 10 Systems=1 qty|
|CTS-SX20-PHD12X-K9||SX20 Quick Set HD NPP 12xPHDCam 1 mic remote cntrl =3 qty|
|BE6K-ST-BDL-K9=||Cisco BE6000 Medium Density Server Export Restricted SW =2 qty|
|CP-DX80-K9=||Cisco DX80 =9 qty|
|CTI-5320-MCU-K9||Cisco TelePresence MCU 5320 up to 40 SD ports=1 qty|
suggest me how to design for above BOQ,by considering above boq i suspect i need to install Following VM in BE6K
Does VCS supports coresident? How to make a design for this BOQ?
I suggest you start with the Deployment Guides.
Given that your call control will need to be a CUCM (to support the DX80s as they won't register to a VCS) - you should be looking at the Expressway-Core and Expressway-Edge products, and not the VCS-Control/Expressways - unless you also need to integrate to legacy or third party devices that aren't supported by CUCM.
Please remember to rate responses and to mark your question as answered if appropriate.