09-30-2011 07:55 AM - edited 03-17-2019 10:31 PM
Hi,
I've read the Design guide 2.0, but it was not so clear about how sizing telepresence link when deploy more than 2 rooms. I 've the following example:
I have a centra site with TP-3010 and CTM, CTMS and CUCM, and other 5 sites with CTS-1300. Is the central link the sum of the other 5 links or is it like the the Design Guide say : about 5Mb/s * 6 ( video streaming + auxiliary input) ?
Thanks in advance
10-02-2011 10:29 PM
Yes the central site where the CTMs located you need to have the bandwidth as the aggregation of all other remote sites
Where single screen endpoints you need around max 6.5 Mbps including the aux/presentation input
While the triple screen one you need around 15 to 16 Mbps
Having said that if the CTS 3010 reach your CTMS over the LAN network and the other sites reach the CTMS over the wan
Then you can exclude the CTS 3010 bandwidth from the required bandwidth for the central site for multipoint calls
As the traffic will from the CTS 3010 to the CTMS will be over the LAN not over the wan
Hope this help
If helpful rate
10-09-2011 07:37 PM
is this answered your question ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide