11-19-2013 09:30 AM - edited 03-18-2019 02:10 AM
I have teleprecense MX200 ,and for user interface there is only touch screen and no control panel.In datasheet i can`t find out something about control panel.Can i use control panel from C60 to control MX200 ? is there power/lan adapter for touch screen which gives we to control my MX200 thought lan ?
Is this adapter comes with MX200 boundle or i my to order it ?
11-19-2013 05:45 PM
There are a few different models of touch panel (and different sizes available) - not all are the same, and don't necessarily work on all devices.
Here's the list from the Cisco TelePresence Touch Devices Datasheet
Product Name | Part Number |
Cisco TelePresence Touch 8-inch for EX Series | CTS-CTRL-DV8= |
Cisco TelePresence Touch 8-inch for Integrator C Series, Profile Series, Quick Set Series | CTS-CTRL-DVC8= |
Cisco TelePresence Touch 8-inch for MX Series | CTS-CTRL-DVP8= |
Cisco TelePresence Touch 10-inch for MX Series | CTS-CTRL-DV10= |
Cisco TelePresence Touch 12-inch for CTS 500, 1100 and 1300 endpoints | CTS-CTRL-DV12UPGKT |
Cisco TelePresence Touch 12-inch for TX endpoints | CTS-CTRL-DV12UPGKT |
Note: the C60's panel has a different part number to the MX200's.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
11-19-2013 11:12 PM
thanks for reply.
Is there power adapter for touch pannel which gives opportunity to control MX200 thought LAN ?
I know that C series have adapter which gives opportunity to control C series teleprecense throught LAN ?
11-20-2013 01:07 AM
I only know the MX300, there you connect the touchpanel directly to the codec/display. No additional power adapter or LAN port necessary.
It seems like the MX200 is identical to the MX300. Look to the install guide on page 5. There you can see the Touchpanel Port.
- Please rate helpful posts -
11-20-2013 02:06 AM
I used touch screen to control C60 throught lan.It`s very comfortable to control teleprecense throught Lan.But in Mx200 Datasheet i couldn`t find to control him throught Lan or remote control,only touch screen which connected directry to MX200
01-31-2018 10:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide