05-07-2019 10:04 PM
Hi Experts,
We have a Telepresence registered on CUCM and managed by TMS. Currently we are migrating all our TP to a new CUCM cluster. The new CUCM cluster were already configured on TMS and Conductor. All TP registered on the new CUCM has a limited screen layout which are Equal and Single. My question is, where can we change, so that all TP on the new cucm can have multiple option of screen layout similar to the TP registered on the old cucm? I'm very new to this field and I know I'm missing a lot of things here.
Please see attached picture for clarification.
I'll very much appreciate your help :)
Thanks,
JP
Solved! Go to Solution.
05-08-2019 08:03 PM
Hello Wayne,
Good day, as per further checking I noticed that the Allow iX Application Media is not checked on the SIP Profile for SIP Trunk of the conductor on the new CUCM. Upon allowing this feature we can now select different layout from the touch 10.
Thank you so much for your time :)
JP
05-08-2019 06:00 PM - edited 05-08-2019 06:00 PM
Some of what you can and can't do will vary depending on the endpoint models and the software version they are running.
WIth the two you are showing, which model units are they, and what software versions are the running? That may be the difference in what you are experiencing (ie, one running an older software release, and the other a newer one - a software update of both to the current release would be recommended).
Please remember to mark helpful responses and to set your question as answered if appropriate.
05-08-2019 08:03 PM
Hello Wayne,
Good day, as per further checking I noticed that the Allow iX Application Media is not checked on the SIP Profile for SIP Trunk of the conductor on the new CUCM. Upon allowing this feature we can now select different layout from the touch 10.
Thank you so much for your time :)
JP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide