cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
971
Views
0
Helpful
7
Replies
Jens Didriksen
Engager

TMS 14.3.1 not playing nice with Codian 4520 MCU - bug?

TMS 14.3.1

Codian 4520 MCU 4.4(3.57)

After upgrading TMS from 14.3 to 14.3.1 I find TMS is no longer recognising the Codian as being registered to a SIP registrar (VCS-C x7.2.2), and active SIP Server address is blank.

As a result, it will no longer allow me to schedule SIP only calls; i.e.:

tms.gif     

In the above conference, the participant at the top should be either H.323 or SIP, participant below should be SIP ("enterprise" JabberVideo client), as should participant number 3 ("free" JabberVideo client).

Prior to upgrading I always had the choice of SIP, H.323 and if applicable, IP, now I only have the choice of H.323, and if applicable, IP.

Strangely enough, when using Mulitway, it will connect to the external jabber.com client as SIP---SIP, whereas in a scheduled call it will go H.323--SIP and call status in the VCS-E actually shows it as H.323---H.323.

I have no such issues with the old MPS800; active SIP Server address listed in TMS as per normal, and I can choose from H.323, SIP and IP.

So, is it a bug?

/jens

Please rate replies and mark question(s) as "answered" if applicable.       

Please rate replies and mark question(s) as "answered" if applicable.
1 ACCEPTED SOLUTION

Accepted Solutions

In the MCU's /configuration.xml, does it say something like:

mcu01@example.com"/>

The field that's empty in your TMS screenshot ("Active SIP Server Address") should have been populated from the proxy_name value in the confiuration.xml as far as I can see.

EDIT: Looks like we did a code change in TMS 14.3.1 when it comes to checking the SIP server address: In earlier versions, TMS read and used the "registrar_name", but starting with 14.3.1, it reads and uses the "proxy_name" instead.

-Kjetil

View solution in original post

7 REPLIES 7
Paul Woelfel
Enthusiast

Hi Jens,

I also got TMS 14.3.1 and Codian 4505 4.4(3.49) running and have all call routing options:


Regards,
Paul

Regards, Paul

Hi Paul,

I see we're using slightly different software versions on the MCU, wonder if that could be the problem - does your Codian show the active sip server address when viewing MCU settings in TMS?

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.

Yes, I can see it as registered.


Regards,
Paul

Regards, Paul

Thanks Paul,

I downgraded Codian to the same firmware you are using, but no change, TMS just ain't recognising the MCU as being registered to the SIP server;

I'll downgrade TMS from 14.3.1 to 14.3 later on today.

/jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.

Won't let me downgrade so uninstalled TMS, ran WUS, installed updates, re-installed TMS 14.3.1; no change.

Purged Codian from TMS and re-added it; no change, TMS still not recognising that the Codian is registered to a SIP server, so not giving me the option to choose SIP as connection protocol - which is not a good thing.

Edit: TAC case opened: #627658297

/jens

Please rate replies and mark question(s) as "answered" if applicable.   

Please rate replies and mark question(s) as "answered" if applicable.

In the MCU's /configuration.xml, does it say something like:

mcu01@example.com"/>

The field that's empty in your TMS screenshot ("Active SIP Server Address") should have been populated from the proxy_name value in the confiuration.xml as far as I can see.

EDIT: Looks like we did a code change in TMS 14.3.1 when it comes to checking the SIP server address: In earlier versions, TMS read and used the "registrar_name", but starting with 14.3.1, it reads and uses the "proxy_name" instead.

-Kjetil

Takker

That fixed it

mvh jens

Please rate replies and mark question(s) as "answered" if applicable.

Please rate replies and mark question(s) as "answered" if applicable.
Create
Recognize Your Peers
Content for Community-Ad