12-10-2011 01:23 AM - edited 03-17-2019 10:40 PM
TMS 13.1.2
In the T3 TCU setup (via touch panel), in the screen where you put in the External Manager, when I start typing on it, the OK button gets greyed out and the font becomes red in that field. Any ideas why it is happening?
On the TMS, which one do you add the IP of the TCU or the center Codec? I added the center codec IP address and it was successfull as I can see the T3 in the Systems->Navigator. TMS can talk to it but when I create conference, it doesnt show as one of the endpoint.
Thoughts?
12-14-2011 12:00 AM
Hi,
In the TMS, add the IP address of the TCU for call scheduling. To add TCU, you need to go to advanced settings and select discover Non-SNMP systems.
You can choose to add the C90 codecs, but that is optional for T3. Adding of C90 means you can monitor the C90 activities etc.
After you add the TCU into the TMS, you can push the phone book etc to the TCU.
12-14-2011 12:13 AM
Yeah, I did that already but it saud System not Found. I can ping the TCU from the TMS. I can add the C90 codecs though
12-14-2011 12:18 AM
hi,
Which version of TCU are you running and TMS version?
12-14-2011 07:12 AM
Tcu 4.1
Tms 13.1.2
12-14-2011 08:18 AM
Hi,
Ok, there is an issue in TCU 4.1 that prevents it from being added into TMS. this will be fixed in the next TCU release.
In the mean time, you can work around this by downgrading your TCU to 4.03 then add it to TMS and then upgrade ba k to tcu4.1 again.
Hope this help.
Sent from Cisco Technical Support iPhone App
12-14-2011 08:20 AM
Cool. Thanks. Do you have the doc or bug info for that?
Do you mean downgrade to 4.0.3 , add it to TMS and immediately upgrade to 4.1?
12-14-2011 08:24 AM
Will send you the bug Id tomorrow.
Yes, downgrade, add to TMS, then upgrade the TCU.
Sent from Cisco Technical Support iPhone App
12-14-2011 06:09 PM
Hi,
Bug ID is CSCtt00589
12-20-2011 03:39 AM
Hi,
Does this bug impacts all TMS versions or is it only impacting TMS 13.1.2 ?
Laurent
12-20-2011 10:08 PM
I was able to downgrade the TCU to 4.0, add the TCU to the TMS and upgrade it back to 4.1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide