TMS ports and protocols

[Chet Cronin]

TMS 15.12.0

What are the ports and protocols used by TMS to communicate with VTC Devices i.e. Configurations, Phonebooks etc. 

Understand https port 443 is one. 

Thank you.

[Jaime Valencia]

Installation guide has that information.

[Chet Cronin]

Note really  as the document doesn't show what ports used for the phonebooks from TMS to the devices ??

[Patrick McCarthy · Accepted solution]

How Cisco TMS Communicates with Managed Systems

Cisco TMS uses HTTP/HTTPS when communicating with managed endpoints and infrastructure products. In addition, SNMP is used for communicating with some older endpoints, such as the Cisco TelePresence System MXP series. Managed systems also initiate connections to Cisco TMS. Examples of such connections include phonebook requests, boot and registration events, and heartbeats from systems behind a firewall. Each Cisco TMS-managed system must therefore be configured with an External Manager Address, which is used for contacting Cisco TMS.

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-5.pdf 

Page 50.