cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
251
Views
0
Helpful
3
Replies
Highlighted
Enthusiast

TMS ports and protocols

TMS 15.12.0

What are the ports and protocols used by TMS to communicate with VTC Devices i.e. Configurations, Phonebooks etc. 

Understand https port 443 is one. 

Thank you.

Chet Cronin
801-815-3539(USA)
801-815-3539 (AFG)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

How Cisco TMS Communicates with Managed Systems

 

Cisco TMS uses HTTP/HTTPS when communicating with managed endpoints and infrastructure products. In addition, SNMP is used for communicating with some older endpoints, such as the Cisco TelePresence System MXP series. Managed systems also initiate connections to Cisco TMS. Examples of such connections include phonebook requests, boot and registration events, and heartbeats from systems behind a firewall. Each Cisco TMS-managed system must therefore be configured with an External Manager Address, which is used for contacting Cisco TMS.

 

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-5.pdf 

 

Page 50. 

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Cisco Employee

Installation guide has that information.

HTH

java

if this helps, please rate
Highlighted

Note really  as the document doesn't show what ports used for the phonebooks from TMS to the devices ??

 

Chet Cronin
801-815-3539(USA)
801-815-3539 (AFG)
Highlighted

How Cisco TMS Communicates with Managed Systems

 

Cisco TMS uses HTTP/HTTPS when communicating with managed endpoints and infrastructure products. In addition, SNMP is used for communicating with some older endpoints, such as the Cisco TelePresence System MXP series. Managed systems also initiate connections to Cisco TMS. Examples of such connections include phonebook requests, boot and registration events, and heartbeats from systems behind a firewall. Each Cisco TMS-managed system must therefore be configured with an External Manager Address, which is used for contacting Cisco TMS.

 

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-5.pdf 

 

Page 50. 

View solution in original post

Content for Community-Ad