cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
738
Views
0
Helpful
5
Replies
Highlighted

TMS Web interface not accessible

Hi All,

I am recently facing an issue with my TMS, unable to access on web interface.

but i can access from server itself.

TMS version 14.4.2, tried with different browsers and different pcs but no results .

restarted server also but no result.

Appreciate your support.

5 REPLIES 5
Highlighted

Check to see if the ports

Check to see if the ports used by TMS is open on the Windows firewall, also if there is a network firewall between you and TMS to allow the ports there as well, refer to the TMS Admin Guides for more information.

Highlighted

Hi Patrick,

Hi Patrick,

Windows FW is  turned off,its ping able, i can access Server's remote desktop.

only the problem is accessing the web interface,Can you please advise what kind of ports need  to open.

From the server itself i can access the Web interface.

Highlighted

The ports are listed in the

The ports are listed in the TMS install guides, the link is in my previous reply.  Also, make sure you're running the correct Windows version etc.

Highlighted
Beginner

Re: TMS Web interface not accessible

Hi,

Did you solve your problem ? I am having the same problem with tmx version 15.7.

thanks,

Vinicius
Highlighted
Cisco Employee

Re: TMS Web interface not accessible

When access the TMS portal from the server itself, are you using localhost, netbios server name, fqdn of server, ip address, loopback IP address?

When accessing remotely, what is the specific connection error? Can you access the default IIS home page in the root directory?