cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
528
Views
15
Helpful
12
Replies
Highlighted
Beginner

TMS with conductor is not integrationg

Hello Experts ;

                       I am getting below error while adding alias on TMS .Although alias seems to be ok . i have TMS 15.0 , CONDT X3.03 , TP 4.2

One or more aliases do not have matching conference aliases on TelePresence Conductor, or their associated service preference is not usable on TelePresence Conductor. Therefore these aliases will not be used for scheduling.

Any help would be appreciated

KV

12 REPLIES 12
Highlighted
Hall of Fame Cisco Employee

And have you matched the

And have you matched the configuration from your conference aliases on TP conductor to those you configured in TMS??

HTH

java

if this helps, please rate
Highlighted
Beginner

Yes ehen i put the alias in

Yes ehen i put the alias in conductor check dialplan . it succcessfully matched with the dial-plan.

Highlighted

Can you tell us the alias you

Can you tell us the alias you're using in Conductor, and what you're trying to configure in TMS?

Also, what settings do you have configured for Conductor within TMS, under Extended Settings?

Highlighted
Beginner

Hello Patrick ;

Hello Patrick ;

              In conductor   

Incoming alias (must use regex)  :  (allhands@XXX\.com).*

In TMS ;

Alias pattern :  allhands@xxx.com

Regular Expression : (allhands@XXX\.com).*

Extended settings :

10000

1

Unlimited

Default view Family

On

Highlighted
Beginner

Please noted that in TMS

Please noted that in TMS under telepresence conductor tab

service preference: none

Highlighted

I just tested what you're

I just tested what you're using for the Conductor and TMS alias, and they are correct.  My TMS saved the alias and was able to recognize the service preference that the alias in Conductor is using.  Make sure that your Conductor alias is configured correct, ie: conference template, service preference, bridge pools, etc.

Highlighted
Beginner

Thanks for your test . I have

Thanks for your test . I have checked the alias ,etc every thing is in right place but still not working. By thw way i am using one TP server for all (adhoc,rendevous and TMS schedulling ) . 

Highlighted

Can you provide screenshots

Can you provide screenshots of how your Conductor is configured, perhaps you might something configured incorrect somehwere, or I can try and replicate your configuration best I can to see where the issue is.

Highlighted
Beginner

Thanks for the your time and

Thanks for the your time and help.. just refresh the services and it works.. But one question if i use one TP for adhoc , rendevo, scheduling conference . it is ok ?

Highlighted

Glad it's working, didn't

Glad it's working, didn't think to have you do a force refresh on the Conductor in TMS, although when I tested your alias I didn't do that or need to.

Don't forget to mark any relevant replies as answered, to help others that might have the same issue find a solution.

Highlighted
Beginner

I have the same problem, so

I have the same problem, so what was the soloution for this in your case?

Thanks,

Marco

Highlighted
Beginner

Just get it.

Just get it.

I forgot the Service Prefence "Pools to use for scheduling"

Now it´s working.

Regards,

Marco