cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
1205
Views
5
Helpful
6
Replies
moe2
Beginner

Touch10 Display incorrect Time

Hello Guys!

 

SX80 is displaying correct Time but Touch 10 is showing incorrect time. We are using SIP and Touch 10 connected direct to SX80 meaning not connected to a switch. We have NTP server, and using DHCP. 

Tried to change time zone from CUCM but it did not work!

 

 

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @moe2,

 

I have found a defect matching the conditions what you have mentioned.

Cisco Touch 10 shows incorrect time, because the ntpd services fail to start on this software version TC7.3.12.

This is the defect link: CSCvh09710.

Please perform a software upgrade to TC 7.3.13 to resolve the issue.

Link to download software : https://software.cisco.com/download/home/286248450/type/280886992/release/TC7.3.13

 

Regards, 

Rishabh Gupta.

Please rate the response and mark as a solution if found appropriate.

 

View solution in original post

6 REPLIES 6
moe2
Beginner

Up!

Rishabh Gupta
Cisco Employee

HI @moe2,

 

What is the software version you are running on this SX80 codec?

What time-zone have you configured ?

 

Software version 3.12 latest
Time zone GMT+3 Riaydh and Kuwait

HI @moe2,

Did you mean to right TC 7.3.12 as current software version?

Is the NTP setting on CUCM is not set to "Unicast"?

Do you see any warning message under SX80 diagnostics ? ( Like >> WARNING: NTP status)

 

Regards,

Rishabh Gupta

1- Yes TC7.3.12 

2- Yes NTP set as "Unicast"

3- No I do not see any warning it is green all the way.  (OK: NTP status

NTP is correctly configured and synchronized)

 

Hi @moe2,

 

I have found a defect matching the conditions what you have mentioned.

Cisco Touch 10 shows incorrect time, because the ntpd services fail to start on this software version TC7.3.12.

This is the defect link: CSCvh09710.

Please perform a software upgrade to TC 7.3.13 to resolve the issue.

Link to download software : https://software.cisco.com/download/home/286248450/type/280886992/release/TC7.3.13

 

Regards, 

Rishabh Gupta.

Please rate the response and mark as a solution if found appropriate.

 

View solution in original post

Content for Community-Ad

Spotlight Awards 2021