cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
810
Views
0
Helpful
1
Replies
Bell Kun
Beginner

TP-500 Setup

Scenario:

Currently, our office would like to setup a TP-500 in local office and remote office in the future. CallManager 8.0 is already installed in local office. Remote office is registered to local office CallManager as well.


1. Except the TP-500 hardware, what license(s) do we need for this case?


2. Do we need to buy a multipoint switch for this p2p setup? Please advise.

1 REPLY 1
hdewulf
Beginner

1. Except the TP-500 hardware, what license(s) do we need for this case?

[Answer] for this question, please contact your local Cisco account team. Also check the CTS release notes

http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_7/release/notes/cts_1_7_release_notes.html#wp42923

Section : Software Agreements and Licensing


2. Do we need to buy a multipoint switch for this p2p setup? Please advise.

[Answer] : Since there are only 2 endpoints, there is no need for CTMS. You need CTSMAN if you want to book the room and have one button to launch the call.

Create
Recognize Your Peers
Content for Community-Ad