Hi.
You can find all the physicall information on this link:
http://www.cisco.com/en/US/docs/telepresence/tx9000/assembly_guide/tx9000_room_recommendations.html#wp1163533
CUCM requirements can be found at
http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_9/compatibility/cts_compatibility_1_9.html
What is the network requirements?
10mbps is required for this System.
How many IP needed?
1 IP/network port for this system. If you want network connectivity on the tables, you need additional network ports.
Configuration requirements for CUCM?
You need at least CUCM 8.5.1 to run 1.9.x CTS software. Configuration will be as easy as the rest of your telepresence equipment.
Thanks
//Marius
