07-07-2008 09:00 AM - edited 03-17-2019 09:25 PM
hi all,
i'm asking how can i configure uc520 for supporting SIPPhones, Skinny work fine, i need to configure a sip server in this unit,
thinx
07-07-2008 09:20 AM
Follow the admin guide for configuring the system for SIP phones.
On the phones, configure username same as extension, and password. Of course configure the CME address as proxy and registrar.
Nothing else is required. Note cisco doesn't supports third-party phones so if something doesn't work, you're are on your own.
Please rate post if it helps!
07-07-2008 09:38 AM
Hi;
and thank you for your feed back, i don't need to configure the sip server in this unit?
07-07-2008 10:21 AM
Yes, as explained in the administrator guide.
As an appreciation to those providing answers, please rate useful posts with the scrollbox below!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide