cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
130
Views
0
Helpful
1
Replies
alex goshtaei
Beginner

vcs cucm trunk

Hi All, 

we've deployed CUCM / VCS , with SIP trunk. however SIP trunk is taking so long to come up, about 10 min. is there any timer I can modify to have SIP registration faster? usually it should be immediately

thanks 

Alex

 

1 REPLY 1

Alex,

SIP trunk from vcs to cucm doesn't register, it just goes active. I suggest you delete the trunk and re-create it. You do not need to adjust any timers. Is there any firewall between the two devices? If there is none, then you might want to first of all delete the neighbour zone on vcs and recreate it. Also delete the sip trunk from cucm to vcs and re create it.

Please rate all useful posts
Create
Recognize Your Peers
Content for Community-Ad