cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

377
Views
0
Helpful
4
Replies

VCS EXPRESSWAY + SX20

 Dears ,

 

Can i use two SX20 endpoints with one VCS Expressway to make internal/external Calls

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Contributor

Hi hossam1989I believe you

Hi

achieve your goal.

Part Number - CTI-VCS-STPAK-K9

However, The VCS is now considered End Of Life :( although the VM version will continue. The replacement (according to the End of Sale announcement), is a "VCS Control And Expressway Platform UCS C220 M3 Bundle"

Part Number - CTI-CE500-BDL-K9

I don't know much about the second option and the cost differences. I also assume that this will be a virtualised solution which has its own restrictions on the hardware you need to use.

 

Cheers

Chris

View solution in original post

4 REPLIES 4
Contributor

Hi hossam1989I believe you

Hi

achieve your goal.

Part Number - CTI-VCS-STPAK-K9

However, The VCS is now considered End Of Life :( although the VM version will continue. The replacement (according to the End of Sale announcement), is a "VCS Control And Expressway Platform UCS C220 M3 Bundle"

Part Number - CTI-CE500-BDL-K9

I don't know much about the second option and the cost differences. I also assume that this will be a virtualised solution which has its own restrictions on the hardware you need to use.

 

Cheers

Chris

View solution in original post

Highlighted

Dear Chris , Thank you very

Dear Chris ,

 

Thank you very much for the rich information , but i have few questions kindly help me with :

1- is the CUCM a replacement for the VCS ??

2- if i have a big deployment more than 100 endpoints whats the best solution to control endpoints and to make them able to call internal/external 

Beginner

Hi Hossam,1 - Yes you can

Hi Hossam,

1 - Yes you can consider CUCM as a replacement for the VCS Control.

Note that :

- If you have old VC endpoints or non Cisco endpoints you need a VCS Control,

- If you need to call external endpoints, you need a VCS Control and a VCS Expressay

For this you can use what explain Chris (VCS Control And Expressway Platform UCS C220 M3 Bundle) or Virtual solution of VCS Control and Expressway.

You can use also Expressway series http://www.cisco.com/c/en/us/products/collateral/unified-communications/expressway-series/datasheet-c78-730478.html?cachemode=refresh

2 - If you have a big deployment I suggest a CUCM + Expressway C & E

Hope it help.

Salim

VIP Advisor

For question 1, the answer is

For question 1, the answer is Yes (in the longer term) - Cisco are trying to migrate people in that direction, but not necessarily a complete product replacement as of today.

There is no precise answer to question 2 - that'll all depend on your business and requirements.

See the Demystifying BE6K presentation for some information which may assist your choices.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here