12-19-2014 02:53 AM - edited 03-18-2019 03:49 AM
Hi,
I'm very much supprised by the statement that VCS x8.5 now includes support for DX series endpoints.
Does anyone have more info on the extent of this support? Will this be MRA expressway support or actual DX registration to VCS-C?
Cant find anything in the usual sources (yet)!
10-07-2015 12:11 PM
Does your Jabber Client work over Collab Edge? Looks like you might be missing the external SRV records for _collab-edge._tls.
10-07-2015 12:43 PM
Sushant issue have been resolved.
https://supportforums.cisco.com/discussion/12618416/dx70-registration-over-mra
08-24-2015 02:13 AM
Hi Jreinmann
Nice to here that MRA working with DX650.. I'm also looking to configure DX650 with Expressway 8.5. Can you please share if there is any guide which you followed for DX650 ?
Regds
$
07-28-2015 05:27 AM
Strange! i have the MX registered via expressway and can make calls but cucm does not see it registered and i dont have the meeting icon from the UC profile. I feel darker things are afoot and telepresence/tms etc
07-28-2015 05:43 AM
Hi Peter,
Are you sure you selected MRA registration and not VCS-E based registration? Your MX can register directly to the Edge if that is a VCS in your case.
09-27-2015 08:05 AM
Yes, the MX is registered with Expressway E on the edge but this is proxied through the Vcs C to call manager. I upgraded to the very latest release of 10.5.2 and this resolved the registered status of the devices. I also have several remote workers using 8841 phones.
12-22-2014 07:12 PM
I have a DX650, DX70, DX80, and SX20 ... I tested the DX650 to reg. to CUCM through CUCM, but I don't know where can I configure on that on DX650?
01-05-2015 09:41 AM
Theses statements are very confusing. What's the use of it?
Which version of DX650/DX70/DX80 will support MRA?
rgds, Geert.
01-06-2015 06:25 AM
Documentation indicates the entire DX series will be supported.
I Too miss the option to configure this in either CUCM or endpoint software. I suspect the Expressway does have support now but the feature still needs to be released in the actual endpoint software versions.
02-25-2015 04:06 PM
Hello All,
I was wondering whether anyone has an update re firmware release on the DX endpoints to support MRA? We have been trying to get a DX80 to register via MRA, using Expressway 8.5(1) but it does not want to play nicely.
Current firmware version of DX80 is sipdx80.10-2-3-33.
Any thoughts / further information?
02-26-2015 01:54 AM
Whilst the Expressway has support for DX80 MRA, the code for the DX80 itself is not available yet, even in pre-release form, so for now there isn't much to do with them outside of the network without VPN.
02-26-2015 05:06 AM
What I have seen is that firmware 10.2.4 will be needed for this. This is supposed to be available Q2CY15.
02-26-2015 04:26 PM
Thanks George (and Martyn),
I'll contact our Cisco SE to see what they might know.
02-26-2015 11:29 PM
The info I got from Cisco recently is it will be supported in the q2 release DX endpoint software. A little more patience required than.
07-16-2015 08:49 PM
Hi All,
We have successfully used MRA with a DX80 but are now wishing to also use Extension Mobility on these devices. Does anyone know if this is supported? Whilst the "EM" option appears within the Settings menu, it has an error that the server cannot be reached. Therefore, I assume it is not tunnelled through MRA properly.
Any thoughts appreciated.
/David
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide