04-04-2011 03:19 PM - edited 03-17-2019 10:15 PM
Hello there.
Is there a way to disable second dial tone on an analog phone connected to a VG224 port so the features like conference or call waitting are disable?
VG is configure as a SCCP
configuration:
voice-port 2/5
cptone MX
timeouts initial 60
timeouts interdigit 60
timeouts ringing infinity
timing hookflash-in 600 80
caller-id enable
Solved! Go to Solution.
04-05-2011 11:53 AM
If max calls=1 and max busy trigger=1 is set, and you reset the port and still see the issue, try this:
no stcapp feature access-code
no stcapp supplementary-services
no sccp
sccp
If those don't work, it's a hack, but you can set the hookflash timer to a really small value so that any normal hookflash is considered a legit hangup and new offhook:
timing hookflash-in 50
04-04-2011 03:37 PM
If SCCP have you tried setting the maximum calls to one (1) on the DN in CUCM? That should do the trick.
04-04-2011 03:42 PM
That was the first thing I did but theres still second dialtone with the hookflash.
04-05-2011 11:53 AM
If max calls=1 and max busy trigger=1 is set, and you reset the port and still see the issue, try this:
no stcapp feature access-code
no stcapp supplementary-services
no sccp
sccp
If those don't work, it's a hack, but you can set the hookflash timer to a really small value so that any normal hookflash is considered a legit hangup and new offhook:
timing hookflash-in 50
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide