The VIC-2FXS is a station device and can provide loopstart and ground start service to a analog phone device. It will give you dialtone.
The VIC-2FXO is a office card. IT is meant to provide a telco office type conenction. This is used to forward digits out to telphony networks. It will not give you dialtone. They cannot be used in a WIC slot of 2600, they can be used in a VIC slot. The 2600 would require a NM-2V, or NM-1V in order for these modules to work properly.
Is there a way in UCCE with using an admin script maybe using the email application in Call Studio to send out an email? I know in UCCX you can send out an email if the script were to fail but is there a way to do it in UCCE? Any help would be great!
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router. Fun lab with repetition. You will be able to test your phones and laptop for connectivity etc. Solution;see attached CME Packet Tracer L...
How to configure IP Address for Cisco Integrated Management Controller CIMC. The Cisco Unified Computing System (UCS) is a data center product composed of computing hardware, virtualization support, switching fabric, and management software.
QuestionHi Team,I just need to confirm if we change NTP servers on UCCX, will it affect the license on UCCX 12.0 ?Do we need to re-host after updating NTP?Already done on CUCM and CUC , and it didn't affect but not sure for CCX. Thank you ...