cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2675
Views
15
Helpful
2
Replies

Video Bandwidth Calculation

Hi,

I have 33 sites with video, but, I dont know if is necesary aditional bandwith depending of the layout on the screens. Aditional I need to know how to calc the bandwith to datacenter MPLS channel in where is allocated the Meeting Server.

1 Site SX20

32 Sites SX10

Bandwith per site 1472 kbps to a 1080p30 video.

Datacenter Bandwith: ?

Thanks for any help!

1 ACCEPTED SOLUTION

Accepted Solutions

Every call will consume a portion of the total bandwidth at each site.

For example, using a call rate of 1152kbps:

  • One remote site with 1 endpoint calls into the Meeting Server will consume 1152kbps at both the remote site and data center.
  • One remote site with 2 endpoints call into the Meeting Server will consume 2304kbps at both the remote site and data center.
  • Two remote sites with 1 endpoint each call into the Meeting Server will consume 1152kbps at each remote site, and 2304kbps at the data center.
  • Two remote sites with 2 endpoints each call into the Meeting Server will consume 2304kbps at each remote site, and 4608kbps at the data center.

View solution in original post

2 REPLIES 2
Manish Gogna
Cisco Employee

Hi,

You can reference the White paper  "Tested Bandwidth Usage for Cisco TelePresence Endpoints in a Point-to-Point Call" 

http://www.cisco.com/c/dam/en/us/products/collateral/collaboration-endpoints/tested_bandwidth_whitepaperx.pdf

and the Bandwidth section of the Collaboration SRND

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html

"Table 13-3 Cisco TelePresence Endpoints – Example Bandwidth Usage" and "Table 13-9 Example of Group Region Matrix" of the above link can be used as a reference.

HTH

Manish

Every call will consume a portion of the total bandwidth at each site.

For example, using a call rate of 1152kbps:

  • One remote site with 1 endpoint calls into the Meeting Server will consume 1152kbps at both the remote site and data center.
  • One remote site with 2 endpoints call into the Meeting Server will consume 2304kbps at both the remote site and data center.
  • Two remote sites with 1 endpoint each call into the Meeting Server will consume 1152kbps at each remote site, and 2304kbps at the data center.
  • Two remote sites with 2 endpoints each call into the Meeting Server will consume 2304kbps at each remote site, and 4608kbps at the data center.

View solution in original post

Create
Recognize Your Peers
Content for Community-Ad