I am attempting to introduce ip sla udp jitter to measure jitter for our video live streaming platform ( pexip infinity ).
We have had packet loss issues to our AWS direct connect for one reason or another but we want to add redundancy with another AWS Direct Connect.
What I would like to do is to setup an ip sla udp jitter probe and when it hits a certain amount of jitter or latency have it trigger a failover to the backup link on a redundant router.
The issue I see, and this may be my misunderstanding on how ip sla works, is that end-to-end ip sla responder must be configured. Is it a must? The other end is not a cisco device but a server.
What I am trying to measure is the jitter from our cisco router to a server in AWS cloud through our direct connection to AWS (BGP neighbor with AWS). We do not have access to AWS router/switch to make sure ip sla responder is configured, if they even use cisco.
I was also looking into BFD but I think that would require opening a discussion in another sub-community.
Any ideas would be much appreciated. Thank you for your kind attention.
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https:...
We have CUCM and CUC (v12.5) which has been directly registered to Cisco's Smart Licensing, but today's I noticed this error from RTMT "Smart Licensing Authorization Renewal Failure". I tried to force the re-authroization and re-registration and now it sa...
Hello I have a Cisco 7841 3pcc Phone, if I specify a custom ringtone and try to play it, it is spit out in the log> Bad parameter in Ring File field: w = tftp: //192.168.220.120/TEST.rawand the standard sound plays.-----------4047 ERR Jan 17 16: 15: 33...