hi,
when i connect analog line direct to analog phone the voice volume is fine but when i connect to 2911 router (fxo port) the volume is low. i have cucmbe8.6 as call agent and 2911 as voice gateway.. following is the config for voice ports
voice-port 0/1/0
translation-profile incoming from-PSTN
supervisory disconnect dualtone mid-call
input gain 14
compand-type a-law
cptone OM
timeouts call-disconnect 5
timeouts wait-release 5
connection plar opx 111
caller-id enable
!
voice-port 0/1/1
translation-profile incoming from-PSTN
supervisory disconnect dualtone mid-call
input gain 14
compand-type a-law
cptone OM
timeouts call-disconnect 5
timeouts wait-release 5
connection plar opx 111
caller-id enable
Regards
