Voice T I P : To simulate a phone call being made from a PBX for testing purposes, type the command:
csim start XXXXXXXXX
where XXXXXXXX = the phone number
you want to test
Then you can see if your voice-over-IP (VoIP) configuration is correct on the router. Make sure that you have done a write memory recently, because this command can sometimes crash the router. [csim is a "hidden command" and should be performed from a gateway router -- Editors.]
AI is going to change many tasks and, as a result, many jobs.
In this podcast on artificialintelligence in the workplace, we explore how jobs may change--and what companies can do to keep workers ahead of the shift:
Check out the podcast:...
Join this featured IT Admin Control Hub session where you’ll hear about the improved Meeting diagnostics capability in Control Hub which provides IT Admins richer insights about their meetings, the participants and the quality of service. See metrics to h...
This document explains how to register a Cisco TelePresence or WebEx device to Cisco WebEx Cloud Service Using API or Local Web Interface use. This procedure is applicable for Collaboration Endpoint Software 9.8 and later. In previous versi...