I see that the Room Kit Pro can support up to 7 cameras and I see the 2 camera control ports. I was told by support that the Room Kit Plus can support 2 cameras, but I am only seeing 1 camera control port. Can someone please explain how I would be able to get control to the 2nd camera? Would I just have to run from the camera control port to a switch and only have control of one camera at a time?
Table of Contents:
1. Reference URLs
2. Type of Certificates
3. Regenerate certificates that have no CTL/ITL impact [no phone impact]
4. Regenerate certificates that have CTL/ITL impact [medium phone impact]
5. Step to delete expired certif...
I have been using the recent release of the WebEx Desktop App (39.9) which has Wireless Sharing feature. Prior to this, we were using the proximity application for sharing, where we can find the performance logs on the %temp% folder of the client machine....
Cisco Recommends Dual NIC deployment for Expressways. But single NIC deployment can be achieved. Points to be noted for single NIC: > Firewall must support NAT Reflection, if not then you can use dual NATing to achieve NAT reflection on unsup...
Learn how Cisco is transforming how you communicate in the modern workplace with new capabilities like expanded Webex calling, unified app experiences, and intelligent devices and tools.
Webex Unified Platform
Deep Dive Briefings