cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4417
Views
15
Helpful
4
Replies

What wireless capabilities does the Cisco Webex Room Kit Plus have?

philekiert
Level 1
Level 1

Apologies as this is probably in the wrong subject, but it was the closest I could think of. Hopefully it should be a lot simpler than most questions here!

 

I'm just going over the Cisco Webex Room Kit Plus trying to figure out what wireless capabilities it has for security reasons. In our service we can't have any wireless functionality enabled in any equipment we supply. The WiFi can be disabled, but I'm curious about the Cisco Intelligent Proximity feature. Does this work completely through WiFi or is there something else at play that can't be fully disabled?

2 Accepted Solutions

Accepted Solutions

tomas_vll
Level 1
Level 1

Proximity uses a ultrasound signal (high frequncy, not noticeable by humans) to broadcast connection adress and tokens. The client (computer or other device) then connects with that information over the  network ( wireless or wired) to the endpoint.

 

this feature can be disabled.

View solution in original post

George Sotiropoulos
Cisco Employee
Cisco Employee

Hello,

 

You can totally disable both Proximity and Ultrasound by web interface: Setup->Configuration->Proximity.

 

or

 

by cli configuration:

xConfiguration Proximity Mode: Off

 

Hope this helps,

G

 

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

View solution in original post

4 Replies 4

tomas_vll
Level 1
Level 1

Proximity uses a ultrasound signal (high frequncy, not noticeable by humans) to broadcast connection adress and tokens. The client (computer or other device) then connects with that information over the  network ( wireless or wired) to the endpoint.

 

this feature can be disabled.

 

Great information, thanks!

George Sotiropoulos
Cisco Employee
Cisco Employee

Hello,

 

You can totally disable both Proximity and Ultrasound by web interface: Setup->Configuration->Proximity.

 

or

 

by cli configuration:

xConfiguration Proximity Mode: Off

 

Hope this helps,

G

 

Please Rate Posts (by clicking on Star) and/or Mark Solutions as Accepted, when applies

Wayne DeNardi
VIP Alumni
VIP Alumni

There is a specific "Cisco Webex Room Kit Plus – NO RADIO" option that you can order - that way you won't have to worry about "disabling" anything.

Wayne

Please remember to mark helpful responses and to set your question as answered if appropriate.