Will VCS v8.6.1 work with TMS v13.2.2?

[Kristof-1]

Hi,

I want to update the VCS C and E to the software version 8.6.1 but don't want to touch the TMS yet.

Will v8.6.1 work with TMS v13.2.2?

Thanks

[Manish Gogna]

Hi Krzysztof,

The interoperability guide suggests that you should be moving to TMS 15.0

https://tp-tools-web01.cisco.com/start/d6/s865

Manish

- Do rate helpful posts -

[Jens Didriksen]

You don't say from which version you are ugrading the VCS from, but just to be doubly sure.....if you are using the old provisioning method; TMS Agent, then this will not work with x8.1 and onwards, you will have to move to TMSPE.

/jens

Please rate replies and mark question(s) as "answered" if applicable.

[Kristof-1]

I'm upgrading from 7.2 and don't use provisioning so it should be fine.

[Ray Boland · Accepted solution]

If you are not using TMSPE or TMS Agent then I think it should not matter.

If you have TMS Agent or TMSPE enabled in TMS, then I think you will need to upgrade to the supported TMSPE version.

VCS 8.7 is out next week too

[Kristof-1]

The customer doesn't use provisioning so it should be fine.

Also, I like to use more mature software so will skip on 8.7 for now.