IOS-XR が動作するルータにおいて、ASR9000 シリーズのみ "show platform summary" コマンドが用意されています。
"show platform", "show inventory", "show diag" コマンド等と共に使用してください。
以下は、show platform summary の実行例です。
※location 指定は必須です。
show platform summary の実行例 |
|---|
RP/0/RSP0/CPU0:ASR9000#show platform summary location all ------------------------------------------------------------------------------- Platform Node : 0/RSP0/CPU0 (slot 4) PID : A9K-RSP-4G Card Type : ASR9K Fabric, Controller, 4G memory VID/SN : V03 / FOCxxxxxxxx Oper State : IOS XR RUN Last Reset : User initiated forced reload all Process: reload : Mon Nov 26 13:54:25 2012 Configuration : Power is enabled Bootup enabled. Monitoring enabled Rommon Ver : Version 1.04(20120201:215518) IOS SW Ver : 4.2.1 Main Power : Power state Enabled. Estimate power 205 Watts of power required. Faults : N/A ------------------------------------------------------------------------------- Platform Node : 0/1/CPU0 (slot 1) PID : A9K-4T-B Card Type : 4-Port 10GE Line Card, Requires XFPs VID/SN : V01 / FOCxxxxxxx Oper State : IOS XR RUN Last Reset : MBI-HELLO reloading node on receiving reload notification Process: mbi-hello : Mon Nov 26 13:54:22 2012 Configuration : Power is enabled Bootup enabled. Monitoring enabled Rommon Ver : Version 1.05(20101118:025914) IOS SW Ver : 4.2.1 Main Power : Power state Enabled. Estimate power 320 Watts of power required. Faults : N/A ------------------------------------------------------------------------------- |