- S'abonner au fil RSS
- Marquer comme nouveau
- Marquer comme lu
- Marquer
- S'abonner
- Page imprimable
- Signaler un contenu inapproprié
02-23-2012 09:59 PM - modifié 03-12-2019 09:43 AM
- Introduction
- Error :- Host not found
- Resolution:-
- Error:- You can’t see the EM feature after hitting the services button
- Resolution:-
- Error:- You can’t log in/out of the EM feature but you can see it after pressing the services button
- Resolution:-
- Error:- To set up speed dials and other services from your phone, please goto https://x.x.x.x:8443/ccmuser/showHome.do
- Resolution:-
- Error:-After a user logs out and the phone reverts to the default device profile, the user finds that the phone services are no longer available.
- Resolution:-
- Error:-After performing a login or logout, the user finds that the phone resets instead of restarting.
- Resolution:-
- Error[201]-Authentication error
- Resolution:-
- Error [22]-Dev.logon disabled
- Resolution:-
- Error [205]-User Profile Absent
- Resolution:-
- Error [208]-EMService Conn. error
- Resolution:-
- Error [25]-User logged in elsewhere
- Resolution:-
- Error:- Http Error [503]
- Resolution:-
- Error:- [202]-Blank userid or pin
- Resolution:-
- Error:- [26]- Busy, please try again
- Resolution:-
- Error:-[6]-Database Error
- Resolution:-
- Error:- [207]-Device Name Empty
- Error:- XML Error [4] Parse Error
- Resolution:-
- Error:- 8945 phone does not show EM service
- Resolution:-
- Error:-[http-8080-9 ] EMX509TrustManager - checkServerTrusted: BSCUCM001.blocksolutions.local Certificate not found in the keystore : the certificate chain is not trusted, Could not validate path.
- Resolution:-
- Error:- Login is unavailable(213)
- Resolution:-
- Error:- Untrusted IP Error
- Resolution:-
- Error:- Extension mobility fails after upgrade to 8.0.3
- Resolution:-
- Error:- 79XX phones cannot access certain SURLs when running firmware 9-0-3+
- Resolution:-
- Login Server Connection Error
- Resolution:-
- Related Links
Introduction
This document describes the common problems in Extension Mobility.
Error :- Host not found
Resolution:-
- Check that the Cisco Tomcat service is running by choosing Cisco Unified Serviceability > Tools > Control Center—Network Services
- If you have changed the ip address on service URL then click on "Update subscriptions" (Device > Device Settings > Phone Services >IP Phone Services Configuration).and resubscribe each phone to which the wrong service was subscribed.
Error:- You can’t see the EM feature after hitting the services button
Resolution:-
-Verify that you have configured the Extension Mobility service
-Verify the service URL is correct
– Start/Restart the EM services on each node you are running.

Error:- You can’t log in/out of the EM feature but you can see it after pressing the services button
Resolution:-
This error comes when you haven’t enabled the extension mobility , subscribed the phones/device profiles to the service as needed and haven’t associated user to a device profile.
Error:- To set up speed dials and other services from your phone, please goto https://x.x.x.x:8443/ccmuser/showHome.do
Resolution:-
The above error comes when you haven’t subscribed the phone or device profile to the EM profile. Once this is done you should be able to see the EM profile and log in correctly.
Error:-After a user logs out and the phone reverts to the default device profile, the user finds that the phone services are no longer available.
Resolution:-
1.
Check the Enterprise Parameters to make sure that the Synchronization Between Auto Device Profile and Phone Configuration is set to True.
2.
Subscribe the phone to the Cisco Extension Mobility service.
Error:-After performing a login or logout, the user finds that the phone resets instead of restarting.
Resolution:-
- Locale change may provide the basis for reset.
- If the User Locale that is associated with the login user or profile is not the same as the locale or device, after a successful login, the phone will perform a restart that is followed by a reset. This occurs because the phone configuration file is being rebuilt.
Error[201]-Authentication error
Resolution:-
The user should check that the correct UserID and PIN were entered; the user should check with the system administrator that the UserID and PIN are correct.
Error [22]-Dev.logon disabled
Resolution:-
Make sure that you have chosen "Enable Extension Mobility" check box on the Phone Configuration window.
.
Error [205]-User Profile Absent
Resolution:-
Make sure that you have associated a Device Profile to the user.
.
Error [208]-EMService Conn. error
Resolution:-
Verify that the Cisco Extension Mobility service is running by choosing Cisco Unified Serviceability > Tools > Control Center—Feature Services
.
Error [25]-User logged in elsewhere
Resolution:-
Check whether the user is logged in to another phone. If multiple logins need to be allowed, ensure the Multiple Login Behavior service parameter is set to Multiple Logins Allowed
.
Error:- Http Error [503]
Resolution:-
- If you get this error when Services button is pressed, check that the Cisco Communications Manager Cisco IP Phone Services service.
- If you get this error when you select Extension Mobility service, check that the Cisco Extension Mobility Application service is running by choosing Cisco Unified Serviceability > Tools > Control Center—Network Services.
Error:- [202]-Blank userid or pin
Resolution:-
Enter a valid userid and PIN.
Error:- [26]- Busy, please try again
Resolution:-
- Check whether the number of concurrent login/logout requests is greater than the Maximum Concurrent requests service parameter. If so, lower the number of concurrent requests.
- To verify the number of concurrent login/logout requests, use Cisco Unified Communications Manager Cisco Unified Real-Time Monitoring Tool to view the Requests In Progress counter in the Extension Mobility object.
Error:-[6]-Database Error
Resolution:-
- Check whether a large number of requests exists
- If large number of requests exists, the Requests In Progress counter in the Extension Mobility object counter specifies a high value. If the requests are rejected due to large number of concurrent requests, the Requests Throttled counter also specifies a high value.
Error:- [207]-Device Name Empty
OR
Error:- XML Error [4] Parse Error
Resolution:-
Check that the URL that is configured for Cisco Extension Mobility is correct and there should be no space in between.
Error:- 8945 phone does not show EM service
Resolution:-
Set service provisioning to default or internal. Refer Bug CSCtx70127
Error:-[http-8080-9 ] EMX509TrustManager - checkServerTrusted: BSCUCM001.blocksolutions.local Certificate not found in the keystore : the certificate chain is not trusted, Could not validate path.
Resolution:-
Follow the below steps in order to resolve the issue:-
1. Go to Certificat managent under security
2. Delete/Add Cisco Tomcat Cert
3. Restart Cisco Tomcat service,Cisco Trust verification service and EM service.
4. Try login to EM.
Error:- Login is unavailable(213)
Resolution:-
This error comes when the device or phone load does not support EMCC (eg. non-supported phone models,supported phone models with older phone load).It could also be the incorrect service URL and/or secure Service URL.
Error:- Untrusted IP Error
Resolution:-
This error comes when "Validate IP Address" service parameter is set to true and user tries to login/logout from a machine whose IP address is not trusted i.e. not listed in Trusted List of Ips service parameter)
Error:- Extension mobility fails after upgrade to 8.0.3
Resolution:-
-> In the CUCM OS Administration page, re-generate the "Tomcat" certificates in all the nodes in the cluster. When the certificate is re-generated, the new certificate will be updated in the DB and CertMgr component should create the tomcat-trust.keystore file.
-> Restart Tomcat in all the nodes.
Error:- 79XX phones cannot access certain SURLs when running firmware 9-0-3+
Resolution:-
Access the service from the services button on the phone or downgrade the phone firmware to 9-0-2SR2 or earlier.
Login Server Connection Error
Resolution:-
If you are running Cisco CallManager Extension Mobility on an IBM-340 platform, check that the system allows anonymous access to the Login Service web site.
And talso check the URL of the Login Service may not be configured properly in the LDAP directory. Check that the URL is correct.
Related Links
Configuration Video on Extension Mobility
Roles and Permissions for Extension Mobility