Afternoon everyone, I'm trying to connect to an APIC using PyATS and the rest.connector.Rest method, but no matter what, I get authentication failures. Here is my testbed file:devices:
apic:
os: apic
type: apic
custom:
abs...
Hi everyone,
I am trying to create a script to remove unwanted users/usernames in our network equipments. I am currently using netmiko 4.2.0 and python 3.7.9. I am already connected via SSH but can't seem to push the commands through. Here is my code...
I received an email with the following access: Enter your lab's private VPN connection information: Lab Network Address: -1 Username: xxxxxx Password: yyyyyy I am using the Cisco AnyConect Mobility Client, but in the email I have not received the IP ...
In Cisco API Console i found .- CEEM API- Cisco Carlsbad IT QA- Cisco On Demand CHIDS API- Cisco PSIRT openVuln API- Corona API- Datafoundation-POE- Hello API- HelloCommerce API- Workforce Mohit But the EoX API was not found for both users.Can you pl...
Hi Guys I am pushing the following config to the cisco routers, thera re about 500 of them, but script is getting failed/---- name: Create ACLhosts: routersgather_facts: falseconnection: localvars:cli:username: "{{ hdn_user_rw }}"password: "{{ hdn_pa...
When trying get RPC from IOS XE 17.9.4 c8000v not getting response or error. On hitting enter the netconf session is getting terminated. below configs are used to BN-CP#show run | sec netconfnetconf sshnetconf-yangBN-CP#
Gentsin assumption that IPAM is unavailable what would be the solution for subject from DNAC API perspective?
Thanks in advance for any relevant reference
I'm using https://github.com/CiscoDevNet/ansible-cml to build CML labs. When using the Cat9000v image, I need to manually cancel the autoinstall process and provide an enable secret password (altough I provide a enable secret as part of the bootstrap...
Hi guys,I saw that NX-OS does not support a request via Netconf, without a filter.<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
<rpc-error>
<error-type>protocol</error-type>
<error-tag>operation-not-supporte...
Hey everyone. I am currently having trouble downloading anything on my Linux servers in CML. I keep getting this error that it is not found. I have done some google searching but haven't seemed to land on anything that works. I have also attached my ...
Hi all!
I hope you all doing well.
I am working with RESTCONF but i could not edit the timeout, is there any way?
this is my code, i set the timeout to 300, but i still get error.
Thanks in advance
def configure_device(xml_payload,**dev_inf):re...
Hello allI hope you are doing well.I am just wondering if there is any way to sync from devices using ncclient because I have searched a lot but I didn't find anything.the session has been successfully opened using ncclient and I can get data but I c...
Hi, we´re currently using the XRGRPC library to interface with our IOS XR equipment.Currently we are configuring L2 pseudowires from our aggregation devices to our SE on PW-HE interfaces.While this currently works fine using the merge config, I want ...